Racers Edge 4" Black Tie Wraps (30)

This is a pack of thirty Racers Edge 4" long black zip tie covers. Zip tie covers make an incredible addition to your pit box, as you can utilize them to secure wires to your chassis, develop pull loops for your fuel tank and carry out quick repair works on the fly throughout a race to your automobile body!

This item praises the above reviewed item.

7 1/2 In Black Tie Wraps (25)

This is a pack of twenty five Racers Edge 7.5" long black zip tie covers. Zip tie covers make an incredible addition to your pit box, as you can utilize them to secure wires to your chassis, develop pull loops for your fuel tank and carry out quick repair works on the fly throughout a race to your automobile body!

You will like this product if you have the product above discussed.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is perfect for all electronic applications.

Get this item to enhance the one you are reading around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Supplies a secure connection for battery and motor connections

INCLUDES:
Two 2-Pin Male Ultra Plug
Four short pieces of Black shrink tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

This item praises the main item here.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Supplies a secure connection for battery and motor connections on
    R/C vehicles

INCLUDES:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001

Frequently acquired with the item that you are currently checking out.



This is a Tube of JB Weld Medium Threadlocker.

FEATURES:
Temperature level resistant to 300°F
Suitable for 1/4 - 1" fasteners
OEM approved

INCLUDES:
6mL tube of threadlocker

SPECS:
Weight: .20 fl oz. (6mL)

You will like this product if you have the product above discussed.

Servo line Color Black and Red

Aiming to tidy up the look of your helicopter, airplane of RC automobile & secure your servo lines from chaffing? Servo Line Covering is a simple method to secure your servo wires, including a clean, aesthetic look to your RC maker, and can be set up in a matter of minutes. Choose from our exciting line of different colors to add a whole brand-new look to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply remove your servo(s) from the receiver, determine the length of covering you will need for your servo wire(s), and open one end of the covering and place the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off an appropriate sized piece of the consisted of heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat gun to shrink it down around the covering, therefore giving you a flush, tight fit over the previously frayed servo covering. Do the very same with completion of your servo wire, taking care to leave the terminal bare so it can quickly connected into your receiver. Also, make sure to take note of the servo wire polarity if you cover the full wire – this will ensure that you will know exactly what instructions to plug your servo terminal into your receiver.