JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Racers Edge 110V Wall Charger 7.2V 800Mah (Racers Edge RCE2831 | RCE2831)
Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Top Seller

Model: Racers Edge RCE2831
Dist. #: RCE2831   SKU: RCE2831

Customer Reviews:  1 of 5 (1 Review)

Out of stock

Price:  $9.99

This item will earn you 10 reward point(s).
10 points = $0.20 off your next order. Learn More

Updated on Apr 3, 2020 08:06:14 PM

>Racers Edge 110V 7.2V 800mAh NiCd Wall Charger...
This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Charger w/Tamiya adapter and is intended for usage with 7.2V NiCd Stick Battery Packs.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capability.  This battery charger is NOT suggested for charging NiMh Cells, or 7.2V batteries to be used for racing.  We recommend that you get a good peak battery charger rather for that function. 

This product compliments the main item right here.



This is the Duratrax Onyx 7.2V 1800mAh NiCd Stick Battery Pack
with Requirement Connector.

FEATURES:
Sport pack for automobiles, trucks, boats and more that need a stick pack
    setup with Conventional adapter

CONSISTS OF:
7.2V 1800mAh NiCd Stick Battery Pack with Requirement Connector

REQUIRES:
NiCd compatible battery charger

SPECIFICATIONS:
Capacity: 1800mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Min. Discharge Voltage: 5.4V
Optimum Recommended Charge Current: 3.6 amps
Discharge Lead: 16AWG 2.75" (70mm) long wire w/Standard adapter
Pack Measurements: 5.2 x 1.8 x 0.9" (131 x 46 x 24mm)
Weight: 11oz (311g)
Number of Welds Per Connection: 4 area welds on strong tabs
Cell Size: Sub-C

This product is regularly purchased with the above stated product.



This is the DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery Pack
with Requirement Connector.

FEATURES:
Ideal sport pack for automobiles, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery with Conventional
    Connector

REQUIRES:
NiMH compatible battery charger such as the Duratrax Onyx series

SPECIFICATIONS:
Capacity: 3000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Min. Discharge Voltage: 5.4V
Optimum Recommended Charge Current: 4 amps
Discharge Lead: 14AWG 2.7" (70mm) long wire w/Standard adapter
Pack Measurements: 5.2 x 1.9 x 0.9" (131 x 47 x 24mm)
Weight: 13 oz (360 g)
Number of Welds per Connection: 6 area welds
Cell Size: Sub-C

This product compliments the above discussed product.



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Pack
with Requirement Connector.

FEATURES:
Ideal sport pack for automobiles, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Conventional
    Connector

REQUIRES:
NiMH compatible battery charger such as the Duratrax Onyx series

SPECIFICATIONS:
Capacity: 5000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Min. Discharge Voltage: 5.4V
Optimum Recommended Charge Current: 5 amps
Discharge Lead: 14AWG 2.7" (70mm) long wire w/Standard adapter
Pack Measurements: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Number of Welds per Connection: 6 area welds
Cell Size: Sub-C

This product compliments the main item right here.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Ideal upgrade for radios discovered in RTR cars
Throttle and guiding trim and reverse
Guiding dual rate dial
Throttle end point change
Channel 3 switch
Throttle fail safe
One year restricted guarantee through Hobby Solutions beginning at date
    of purchase

CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Manual and On/Off Switch

REQUIRES:
Servos of modeler's choice
Four AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: Four AA cells
Present Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Present Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work effectively when other type of battery is used

REMARKS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos including the BLS series and most peripheral
    equipment such as brushless ESCs

Frequently Bought Together

Racers Edge 110V Wall Charger 7.2V 800Mah
+
Traxxas Control Box Complete 2.5
+
DuraTrax Onyx AA Alkaline Battery (4)
This Item: Racers Edge 110V Wall Charger 7.2V 800Mah
$9.99
Traxxas Control Box Complete 2.5
$15.00
DuraTrax Onyx AA Alkaline Battery (4)
$3.99

Total Price: $28.98

Add All Three To Cart
1 out of 5 stars
5 star  
  (0)
4 star  
  (0)
3 star  
  (0)
2 star  
  (0)
1 star  
  (1)

Share your thoughts with others

Write a Customer Review
  
  

 Not a very good product
By Bart S on November 17, 2017   Verified Purchase

Burned up after a week. Only used it 5 times

Was this review helpful to you?
  
Thank you for your feedback.

Customers who bought this product also purchased

Visual Parts Finder
What's New?
";