Quantum Parallel 6 X JST-XH 2S Charge/Bal. Cable For Trex 150

Quantum Parallel 6 X JST-XH TWO Charge/Balance Cable television For Trex 150 Q-CL-0040

Our parallel charge leads permit you to charge up to six battery packs all at once. Constructed from the greatest quality materials, they provide you the very best connection possible every time you charge your batteries.

Specifications
Input Charge Adapter: Male 4mm Banana Plug
Input Balance Adapter: Male TWO JST-XH

Output Adapter: TWO Female JST-XH
Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead
Current Score: 8A
Length: 4"

Regularly gotten with the product that you are presently reviewing.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and efficiency will decrease due to high current, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capability cannot go beyond 80% of limit capability after complete crediting make sure a good cycle performance.Recommend to complete charge a brand name brand-new battery prior to utilizing and only release the battery 50% for very first 5 times making a good efficiency of the battery. Please make it a routine to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature approximately 35℃ in a airtight automobile. The environment high temperature might cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery right away. Wait to cool down(about 20 minutes), then check to charge. If against follow the original factory utilizing guidelines, potentially cause the battery to pump up or any dangerous accident takes place.
Do not leave the charger is running unattended as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Regularly gotten with the product that you are presently reviewing.

2S1P 7.4V 300mAh/30C

Usage for T-REX 150.

Instruction::
This Li-poly battery is utilizing series/balancing design, includes high effective and high discharge.
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and efficiency will decrease due to high current, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capability cannot go beyond 80% of limit capability after complete crediting make sure a good cycle performance.Recommend to complete charge a brand name brand-new battery prior to utilizing and only release the battery 50% for very first 5 times making a good efficiency of the battery. Please make it a routine to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature approximately 35℃ in a airtight automobile. The environment high temperature might cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery right away. Wait to cool down(about 20 minutes), then check to charge. If against follow the original factory utilizing guidelines, potentially cause the battery to pump up or any dangerous accident takes place.
Do not leave the charger is running unattended as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:18g
Support 5C charging (Charging error might result in battery surge, fire, and other unforeseen danger or property loss. Please always charge batteries with devices in sight, do not leave charger unattended. Should you need to leave the charging location, please remove the battery and abort charging procedure.)