Quantum Parallel 6 X JST-XH 2S Charge/Bal. Cable For Trex 150

Quantum Parallel 6 X JST-XH 2S Charge/Balance Cable television For Trex 150 Q-CL-0040

Our parallel charge leads permit you to charge up to six battery loads concurrently. Constructed from the highest quality products, they provide you the best connection possible each time you charge your batteries.

Specifications
Input Charge Adapter: Male 4mm Banana Plug
Input Balance Adapter: Male 2S JST-XH

Output Adapter: 2S Female JST-XH
Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead
Present Rating: 8A
Length: 4"

Frequently purchased with the thing that you are presently reviewing.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Guideline::
Max Constant Discharge: 30C. Normal operating temperature level is approx. 40-65?C(within 80% of rated discharge). Max. temperature level: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high existing, high temperature level and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Discharging capacity can't surpass 80% of the max capacity after full charging to ensure a great cycle performance.Recommend to full charge a brand name new battery before using and just discharge the battery 50% for first 5 times to make a great efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not decrease than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature level up to 35℃ in a airtight vehicle. The environment high temperature level could cause the damage or the threat of burst. If the battery becomes hot while high existing discharging or flying, please do not charge the battery right away. Wait to cool off(about 20 mins), then check to charge. If against follow the initial factory using guidelines, perhaps cause the battery to inflate or any harmful mishap happens.
Do not leave the charger is operating ignored as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

Frequently purchased with the thing that you are presently reviewing.

2S1P 7.4V 300mAh/30C

Usage for T-REX 150.

Guideline::
This Li-poly battery is using series/balancing design, features high reliable and high discharge.
Max Constant Discharge: 30C. Normal operating temperature level is approx. 40-65?C(within 80% of rated discharge). Max. temperature level: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high existing, high temperature level and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Discharging capacity can't surpass 80% of the max capacity after full charging to ensure a great cycle performance.Recommend to full charge a brand name new battery before using and just discharge the battery 50% for first 5 times to make a great efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not decrease than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature level up to 35℃ in a airtight vehicle. The environment high temperature level could cause the damage or the threat of burst. If the battery becomes hot while high existing discharging or flying, please do not charge the battery right away. Wait to cool off(about 20 mins), then check to charge. If against follow the initial factory using guidelines, perhaps cause the battery to inflate or any harmful mishap happens.
Do not leave the charger is operating ignored as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:18g
Support 5C charging (Charging mistake could result in battery surge, fire, and other unexpected threat or home loss. Please always charge batteries with devices in sight, do not leave charger ignored. Ought to you have to leave the charging location, please eliminate the battery and terminate charging procedure.)