Quantum Parallel 6 X JST-XH 2S Charge/Bal. Cable For Trex 150

Quantum Parallel 6 X JST-XH 2S Charge/Balance Cable For Trex 150 Q-CL-0040

Our parallel charge leads allow you to charge up to 6 battery loads at the same time. Built from the highest quality materials, they give you the best connection possible every time you charge your batteries.

Specifications
Input Charge Connector: Male 4mm Banana Plug
Input Balance Connector: Male 2S JST-XH

Output Connector: 2S Female JST-XH
Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead
Existing Score: 8A
Length: 4"

Regularly acquired with the product that you are presently checking out.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high present, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity cannot go beyond 80% of the max capacity after complete charging to guarantee a good cycle performance.Recommend to complete charge a brand name new battery before using and just release the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a practice to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature up to 35℃ in a airtight automobile. The environment high temperature could trigger the damage or the risk of burst. If the battery becomes hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then check to recharge. If against follow the initial factory using guidelines, potentially trigger the battery to inflate or any harmful accident occurs.
Do not leave the battery charger is running ignored as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Regularly acquired with the product that you are presently checking out.

2S1P 7.4V 300mAh/30C

Usage for T-REX 150.

Instruction::
This Li-poly battery is using series/balancing design, includes high reliable and high discharge.
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high present, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity cannot go beyond 80% of the max capacity after complete charging to guarantee a good cycle performance.Recommend to complete charge a brand name new battery before using and just release the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a practice to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature up to 35℃ in a airtight automobile. The environment high temperature could trigger the damage or the risk of burst. If the battery becomes hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then check to recharge. If against follow the initial factory using guidelines, potentially trigger the battery to inflate or any harmful accident occurs.
Do not leave the battery charger is running ignored as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:18g
Assistance 5C charging (Charging mistake could result in battery surge, fire, and other unforeseen risk or home loss. Please always charge batteries with devices in sight, do not leave battery charger ignored. Need to you have to leave the charging area, please remove the battery and terminate charging process.)