Quantum EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Excellent quality charge lead.

You will like this product if you have the product earlier stated.



Don't wish to chop the existing connector off of your ESC or battery? Wish to save yourself a lot of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the fast, easy and budget-friendly option for your mismatched connector.

Right here is one more item that compliments the item being discussed.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Beast Truck

FUNCTIONS:
Steel building and construction

CONSISTS OF:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

REQUIRES:
Installation following the kit manual

You will like this product if you have the product earlier stated.



This item compliments the above discussed item.



This is the Li-Po Battery Security Bag by Team C Racing

Many others have actually purchased this item together with the item that you are presently checking out.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel building and construction
Black and silver in color

CONSISTS OF:
2 M3x20mm socket screws
6 M3x10mm socket screws
6 M3x12mm socket screws
6 M3x140mm socket screws
Four M3x20mm socket screws
6 M3x25mm socket screws
6 M3x32mm socket screws
6 M3x8mm socket screws
6 M3x10mm set screws
6 M3x18mm set screws
6 M4x5mm set screws

REQURIES:
Installation into helicopter

Right here is one more item that compliments the item being discussed.

Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Don't spend throughout the day charging your batteries one at a time.
This Paraboard lets you charge and balance up to 6 lipo batteries at the same time! This board features EC3 plugs for your batteries' primary leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into a lot of popular designs of 6S lipo stabilizing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most out of your Paraboard, get among our GT-400 battery chargers. It provides 400W of total charging power and charge rates of approximately 20 amps! This paraboard has a maximum charge rate of 30 amps.
Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, and so on) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, and so on) of all other batteries linked to the Paraboard at the same time. Utilize a Cell Spy or comparable voltage tester to examine the voltage of each cell before linking to the Paraboard.