ProTek RC Male Jst Style Connectors (4)

This is a pack of 4 male JST design adapters. These are unassembled, and can be used to fix a bad JST connector lead, or to construct your own JST leads.

ProTek R/C is an AMain.com brand name.

Frequently purchased with the thing that you are presently reading about.

Female Jst Style Connectors (4)

This is a pack of 4 female JST design adapters. These are unassembled, and can be used to fix a bad JST connector lead, or to construct your own JST leads.

ProTek R/C is an AMain.com brand name.

The below thing also sets actually well with the thing being gone over.



These are the Hitec Unassembled Male Connectors.

FEATURES:
Compatible with Futaba J, Hitec, Airtronics Z and JR systems
Permits modelers to custom make their own extensions, servo leads,
    battery leads and more
Fits wire sizes from 20 to 30 AWG
No soldering needed

CONSISTS OF:
3 sockets and 1 unassembled male shells

NEEDS:
Servo wire (HRCM3001)
Wire crimping tool

This thing is frequently purchased with the above mentioned thing.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and extend life of motor or ESC
Thirty day limited service warranty starting at date of purchase-valid
    in the United States just

CONSISTS OF:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Adapter

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Frequently purchased with the thing that you are presently reading about.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electrical fans lower motor temperature levels as much as 30 degrees
Formed plastic shroud, black in color
One year limited service warranty through Castle Creations starting at date
    of purchase

CONSISTS OF:
Two Fans, Shroud, 2 Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

This is a wonderful enhancement to the thing presently being gone over.

Led Lights, Front Harness (4 C

    This is the Front LED Light Harness for usage on the
Traxxas Top Truck RTR

FUNCTIONS:
JST Adapter
Clear LED Lights

CONSISTS OF:
Four LED Lights
Two Zip Ties

NEEDS:
Installation on the car

Right here is another thing that praises the thing being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Created for usage with the majority of Park Leaflet ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female adapters with wire, usage GPMM3107
This connector can be used to replace BEC-type adapters.