Proline ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not deal with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
2 front arms
One Proline decal

NEEDS:
Setup onto vehicle

Regularly gotten with the item that you are currently reviewing.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for use on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
2 rear arms
One Proline decal

NEEDS:
Setup onto vehicle

You will certainly like this item if you have the item above mentioned.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the vehicle

This item compliments the main item right here.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon building, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Setup on the vehicle

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

Want an additional fantastic item to match the above pointed out item?

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Below is an additional item that compliments the item being reviewed.



This is a pair of Pro-Line M2 Trencher 2.8" All Surface Truck Tires
installed on Desperado Black Wheels.

FEATURES:
Fits the rear of the Traxxas Jato, Nitro Stampede and Nitro Rustler
    and the front of the electrical Stampede and Rustler
Horizontal H shaped tread for high amount of traction and side-to-
    side stability
Oversized tread is almost 1/4" (6mm) high
Detailed sidewall design contributes to reasonable appearance
High density molded foam inserts
M2 firmness compound
Wheels are built of nylon with a molded-in beadlock ring for
    scale appearance

CONSISTS OF:
2 Pro-Line Trencher Offroad Tires, PROC1183
2 Pro-Line Desperado 2.8" Wheels in Black, PROC2743
Foam Places

NEEDS:
Installing on vehicle

SPECS:
Height: 4.87" (124mm)
Width: 2.86" (73mm)

You will certainly like this item if you have the item above mentioned.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

Regularly gotten with the item that you are currently reviewing.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the vehicle