Proline Interco TSL Super Swamper 2.2 G8 Tires (2)

This is a pair of Interco TSL SX Super Swamper G8 Rock Surface Tires
with Memory Foam from Pro-Line.

FUNCTIONS:
G8 (rock surface) compound
Black in color
Interco TSL SX Super Swamper reproduction design
Fits front or rear 2.2" wheels

INCLUDES:
Two Interco TSL SX Super Swamper G8 Rock Surface Tires
Memory Foam

NEEDS:
Wheels
Tire Glue DTXR2000, DTXR2002

SPECIFICATIONS:
Height: 5-1/4" (132mm)
Width: 2-1/4" (57mm)
Inner Diameter: 2.2" (56mm)

You will certainly enjoy this item if you have the item just above discussed.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of very strong composite material
Gray aluminum ring
Fits 12mm hex hubs
Real beadlock design, no untidy gluing required

INCLUDES:
Two Axial 2.2 Beadlock Wheels in Black with ring mounting hardware

NEEDS:
Tires of modeler's choice

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

Lots of others have actually purchased this item together with the item that you are currently reading about.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For usage with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on tough obstacles
Suggested for usage on the front wheels to assist with climbing by
    lowering the center of mass
Steel building

INCLUDES:
2.2 Internal Wheel Weight Calling with Installing Hardware

NEEDS:
Securing to wheel with consisted of hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

Right here is a excellent item that many others have actually purchased the exact same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building

INCLUDES:
One 48DP 87T stimulate gear

NEEDS:
Installation on the Rock Crawler

Right here is another item that praises the item being reviewed.



This is the ST Racing Ideas Aluminum Steering Linkage or
Rear Steer Conversion for the Axial SCX10/AX10.

FUNCTIONS:
Machined aluminum building, silver in color

INCLUDES:
0.24 x 4.2" (6 x 106mm) Steering Link
0.24 x 1.3" (6 x 33mm) Short Steering Link

Right here is another item that praises the item being reviewed.



This is the ST Racing Ideas Sturdy Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FUNCTIONS:
The stock plastic steering linkage on the Axial Wraith is a common
grievance of weak point on this automobile, as the stock pieces have the tendency to
be careless and weak in transferring the torque and power coming from
the guiding servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a small bent that permits all the power and
torque from the servo to be transferred in a perpendicular angle to
the arm of the knuckle to make sure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One brief link tube
4 M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
diameter: 7mm (9/32")
Short link, length: 2-3/4" (70mm)
diameter: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
straight ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)