Proline Interco TSL Super Swamper 2.2 G8 Tires (2)

This is a pair of Interco TSL SX Super Swamper G8 Rock Surface Tires
with Memory Foam from Pro-Line.

FEATURES:
G8 (rock terrain) compound
Black in color
Interco TSL SX Super Swamper reproduction design
Fits front or rear 2.2" wheels

CONSISTS OF:
Two Interco TSL SX Super Swamper G8 Rock Surface Tires
Memory Foam

REQUIRES:
Wheels
Tire Glue DTXR2000, DTXR2002

SPECIFICATIONS:
Height: 5-1/4" (132mm)
Width: 2-1/4" (57mm)
Inner Diameter: 2.2" (56mm)

You will certainly enjoy this thing if you have the thing just above mentioned.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of extremely strong composite material
Gray aluminum ring
Fits 12mm hex hubs
True beadlock design, no untidy gluing needed

CONSISTS OF:
Two Axial 2.2 Beadlock Wheels in Black with ring mounting hardware

REQUIRES:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

Lots of others have purchased this product in addition to the product that you are currently reading about.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on hard obstacles
Suggested for use on the front wheels to assist with climbing up by
    decreasing the center of gravity
Steel building and construction

CONSISTS OF:
2.2 Internal Wheel Weight Ring with Mounting Hardware

REQUIRES:
Attaching to wheel with included hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

Right here is a excellent product that lots of others have purchased the same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Installation on the Rock Spider

Right here is one more product that praises the product being talked about.



This is the ST Racing Principles Aluminum Steering Linkage or
Rear Steer Conversion for the Axial SCX10/AX10.

FEATURES:
Machined aluminum building and construction, silver in color

CONSISTS OF:
0.24 x 4.2" (6 x 106mm) Steering Link
0.24 x 1.3" (6 x 33mm) Short Steering Link

Right here is one more product that praises the product being talked about.



This is the ST Racing Principles Heavy Duty Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FEATURES:
The stock plastic steering linkage on the Axial Wraith is a typical
complaint of powerlessness on this car, as the stock pieces have the tendency to
be careless and weak in moving the torque and power originating from
the guiding servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a minor bent that permits all the power and
torque from the servo to be transferred in a perpendicular angle to
the arm of the knuckle to ensure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One short link tube
Four M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
size: 7mm (9/32")
Short link, length: 2-3/4" (70mm)
size: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
directly ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)