Proline Interco TSL Super Swamper 2.2 G8 Tires (2)

This is a set of Interco TSL SX Super Swamper G8 Rock Terrain Tires
with Memory Foam from Pro-Line.

FUNCTIONS:
G8 (rock terrain) compound
Black in color
Interco TSL SX Super Swamper replica design
Fits front or rear 2.2" wheels

CONSISTS OF:
2 Interco TSL SX Super Swamper G8 Rock Terrain Tires
Memory Foam

REQUIRES:
Wheels
Tire Glue DTXR2000, DTXR2002

SPECS:
Height: 5-1/4" (132mm)
Width: 2-1/4" (57mm)
Inner Size: 2.2" (56mm)

You will certainly enjoy this thing if you have the thing just above discussed.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of extremely strong composite product
Gray aluminum ring
Fits 12mm hex centers
Real beadlock design, no messy gluing required

CONSISTS OF:
2 Axial 2.2 Beadlock Wheels in Black with ring installing hardware

REQUIRES:
Tires of modeler's choice

SPECS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

Numerous others have gotten this item in addition to the item that you are currently checking out.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on hard obstacles
Advised for use on the front wheels to help with climbing up by
    decreasing the center of mass
Steel building

CONSISTS OF:
2.2 Internal Wheel Weight Sounding with Installing Hardware

REQUIRES:
Securing to wheel with consisted of hardware

SPECS:
Weight of Each Ring: 2oz (57g)

Here is a wonderful item that numerous others have purchased the very same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T spur gear

REQUIRES:
Installation on the Rock Spider

Here is another item that compliments the item being gone over.



This is the ST Racing Ideas Aluminum Steering Linkage or
Rear Steer Conversion for the Axial SCX10/AX10.

FUNCTIONS:
Machined aluminum building, silver in color

CONSISTS OF:
0.24 x 4.2" (6 x 106mm) Steering Link
0.24 x 1.3" (6 x 33mm) Brief Steering Link

Here is another item that compliments the item being gone over.



This is the ST Racing Ideas Sturdy Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FUNCTIONS:
The stock plastic steering linkage on the Axial Wraith is a typical
complaint of weak point on this automobile, as the stock pieces have the tendency to
be careless and weak in transferring the torque and power originating from
the guiding servo. Our CNC Machined Aluminum Steering link includes
7mm thick aluminum tubes for lower and upper steering links. The
upper link includes a small bent that enables all the power and
torque from the servo to be transferred in a perpendicular angle to
the arm of the knuckle to guarantee no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One short link tube
4 M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECS:
Long link, length: 6-7/16" (164mm)
diameter: 7mm (9/32")
Brief link, length: 2-3/4" (70mm)
diameter: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
straight ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)