Proline Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a wide variety of bodies
    to be utilized including rally car bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Installing Hardware

This thing compliments the main item below.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD short course racing or yard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Developer Car Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Water resistant*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Guidelines

REQUIRES:
Battery connector of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

COMMENTS:
*Not intended for operation while submerged in liquid. If unit is
    operated in wet conditions, wash with fresh water to eliminate dirt
    or corrosives, then fully dry unit.
Maximum recommended vehicle weight is 6.5lbs (2.95kg)

Get this thing to enhance the one you are reading around.



Many others have bought this thing along with the thing that you are presently reviewing.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for better handling and greater
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Right here is a excellent thing that numerous others have bought at the very same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

This thing is regularly bought with the above mentioned thing.

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FEATURES:
Pinion equipment with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")