Proline Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide array of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Mounting Hardware

This item praises the main item right here.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Perfect for 2WD or 4WD brief course racing or backyard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Programmer Automobile Card
    (CSEM6300) required, not included)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Guidelines

REQUIRES:
Battery connector of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

REMARKS:
*Not planned for operation while submerged in liquid. If system is
    operated in damp conditions, rinse with fresh water to eliminate dirt
    or corrosives, then totally dry unit.
Maximum suggested car weight is 6.5lbs (2.95kg)

Get this item to boost the one you read around.



Numerous others have bought this item in addition to the item that you are presently checking out.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and higher
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Here is a fantastic item that lots of others have bought at the same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This item is regularly bought with the above pointed out item.

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")