Proline Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide array of bodies
    to be used including rally car bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Mounting Hardware

This thing praises the main item right here.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Perfect for 2WD or 4WD brief course racing or yard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Programmer Car Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

NEEDS:
Battery connector of modeler's choice

SPECS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

COMMENTS:
*Not intended for operation while immersed in liquid. If device is
    run in wet conditions, wash with fresh water to eliminate dirt
    or corrosives, then completely dry unit.
Maximum advised automobile weight is 6.5pounds (2.95kg)

Get this thing to enhance the one you are reading around.



Several others have actually bought this thing along with the thing that you are presently checking out.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Right here is a great thing that lots of others have actually bought at the exact same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic construction

INCLUDES:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

This thing is often bought with the above discussed thing.

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion equipment with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")