Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

CONSISTS OF:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This item is regularly purchased with the above pointed out item.



This is the optional Pro-Line Body Mount Replacement Set
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Replaces body installs in the Pro-Line #6070-00 (PROC7000) Prolonged
    Body Mount Set
Totally adjustable installs fit any body perfectely
Long body installs consisted of to fit rally automobile bodies
Screw-on body install system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts Tree

Here is a terrific item that numerous others have purchased the same time.



This is a CVD Coupling Rebuild Set used for different Beast Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FEATURES:
Black oxide rust preventive finish on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will certainly like this thing if you have the thing previously stated.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Installs
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Permits any body to be installed to the Traxxas Revo 3.3, E-Revo, and
Top
Secure-Loc Cap screw-on body install system eliminates body clips
Nylon construction, black in color

CONSISTS OF:
Front and Rear Body Installs and Posts
Mounting Hardware

This item is regularly purchased with the above pointed out item.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for better handling and higher
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Instructions

Often purchased with the item that you are presently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Nearly 25% lighter than stock versions
Increased clearance areas in the external portion enables increased
    droop travel when used with RPM #80372 and #80382 extra-large
    bearing carriers

CONSISTS OF:
2 Strong Front-A Arms in Red

Get this item to enhance the one you are reading around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a wide variety of bodies
    to be used including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Mounting Hardware