Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

CONSISTS OF:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This product is often acquired with the above pointed out product.



This is the optional Pro-Line Body Mount Replacement Package
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Replaces body mounts in the Pro-Line #6070-00 (PROC7000) Prolonged
    Body Mount Package
Completely adjustable mounts fit any body perfectely
Long body mounts included to fit rally car bodies
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts Tree

Here is a fantastic product that lots of others have purchased the very same time.



This is a CVD Coupling Rebuild Package utilized for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive finish on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm size x 9mm length
(2) Set screw 4.0 x 3mm

You will enjoy this product if you have the product previously pointed out.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Installs
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Enables any body to be mounted to the Traxxas Revo 3.3, E-Revo, and
Top
Secure-Loc Cap screw-on body install system removes body clips
Nylon construction, black in color

CONSISTS OF:
Front and Rear Body Installs and Posts
Mounting Hardware

This product is often acquired with the above pointed out product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for much better handling and higher
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Regularly acquired with the product that you are currently reading about.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Almost 25% lighter than stock versions
Increased clearance locations in the external part allows increased
    droop travel when utilized with RPM #80372 and #80382 large
    bearing providers

CONSISTS OF:
Two Strong Front-A Arms in Red

Get this product to boost the one you read about.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide range of bodies
    to be utilized including rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Mounting Hardware