Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

INCLUDES:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This item is frequently bought with the above pointed out item.



This is the optional Pro-Line Body Mount Replacement Kit
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Replaces body mounts in the Pro-Line #6070-00 (PROC7000) Prolonged
    Body Mount Kit
Entirely adjustable mounts fit any body perfectely
Long body mounts consisted of to fit rally vehicle bodies
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes Tree

Right here is a fantastic item that many others have bought at the same time.



This is a CVD Coupling Rebuild Kit used for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive finish on the coupling

INCLUDES:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will enjoy this product if you have the product above mentioned.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Mounts
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Allows any body to be installed to the Traxxas Revo 3.3, E-Revo, and
Summit
Secure-Loc Cap screw-on body mount system eliminates body clips
Nylon building, black in color

INCLUDES:
Front and Rear Body Mounts and Publishes
Mounting Hardware

This item is frequently bought with the above pointed out item.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and greater
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Often bought with the item that you are currently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Heavy Duty Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building, red in color
Nearly 25% lighter than stock variations
Increased clearance locations in the outer portion permits increased
    sag travel when used with RPM #80372 and #80382 extra-large
    bearing providers

INCLUDES:
Two Heavy Duty Front-A Arms in Red

Get this item to boost the one you read around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide range of bodies
    to be used including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Mounting Hardware