Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

INCLUDES:
4 each Thumbwashers, 4x12mm Set Screws, and O-Rings

This thing is frequently acquired with the above discussed thing.



This is the optional Pro-Line Body Mount Replacement Set
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Changes body mounts in the Pro-Line #6070-00 (PROC7000) Prolonged
    Body Mount Set
Entirely adjustable mounts fit any body perfectely
Long body mounts included to fit rally car bodies
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes Tree

Right here is a excellent thing that numerous others have purchased the same time.



This is a CVD Coupling Rebuild Set utilized for different Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive surface on the coupling

INCLUDES:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will certainly like this thing if you have the thing just above stated.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Mounts
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Enables any body to be mounted to the Traxxas Revo 3.3, E-Revo, and
Summit
Secure-Loc Cap screw-on body install system gets rid of body clips
Nylon construction, black in color

INCLUDES:
Front and Rear Body Mounts and Publishes
Mounting Hardware

This thing is frequently acquired with the above discussed thing.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Frequently acquired with the thing that you are currently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Almost 25% lighter than stock variations
Increased clearance locations in the external part enables increased
    sag travel when utilized with RPM #80372 and #80382 extra-large
    bearing providers

INCLUDES:
Two Strong Front-A Arms in Red

Get this thing to boost the one you are reading around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts allow a wide range of bodies
    to be utilized including rally car bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Mounting Hardware