Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

CONSISTS OF:
4 each Thumbwashers, 4x12mm Set Screws, and O-Rings

This product is regularly gotten with the above pointed out product.



This is the optional Pro-Line Body Mount Replacement Package
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Replaces body installs in the Pro-Line #6070-00 (PROC7000) Extended
    Body Mount Package
Entirely adjustable installs fit any body perfectely
Long body installs included to fit rally vehicle bodies
Screw-on body mount system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts Tree

Here is a terrific product that lots of others have purchased the same time.



This is a CVD Coupling Rebuild Package used for different Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FEATURES:
Black oxide rust preventive finish on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will like this thing if you have the thing just above stated.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Installs
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Permits any body to be mounted to the Traxxas Revo 3.3, E-Revo, and
Summit
Secure-Loc Cap screw-on body mount system gets rid of body clips
Nylon construction, black in color

CONSISTS OF:
Front and Rear Body Installs and Posts
Installing Hardware

This product is regularly gotten with the above pointed out product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and greater
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Directions

Regularly gotten with the product that you are currently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Almost 25% lighter than stock versions
Increased clearance areas in the external part allows increased
    sag travel when used with RPM #80372 and #80382 extra-large
    bearing providers

CONSISTS OF:
2 Strong Front-A Arms in Red

Get this product to boost the one you are reading around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a wide array of bodies
    to be used including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Installing Hardware