Proline Big Bore Scaler Shocks (50mm) (4) for SCX24 & AX24

Overview

This a set of Huge Bore Scaler Shocks, developed specifically for the Axial® AX24™. Take your AX24™ to the next level of performance in Pro-Line Style! Much like our very popular 1/10 variation, these mini Huge Bore Scaler Shocks function CNC machined Aluminum Shock Caps, Threaded Bodies, Bottom Caps, and Refined Steel Shock Shafts for included style and durability over the stock shocks. The large 5mm bore shock bodies allow the shocks to function as real performance Huge Bore Shocks due to the bigger oil volume. A double O-ring seal on the main shaft gets rid of leakages and supplies a smooth, low-friction shock action. The long-travel 50mm length is a direct replacement on the AX24™ however can also be used as an extended-travel alternative on the SCX24™!

The Big Bore Shocks come pre-assembled in a set of 4 with all installing hardware consisted of. All you need to do is unscrew the top cap and include silicone shock oil (20wt suggested) to fill the shock body. Replace the cap and compress the shock 3-4 times to fully lube the shock shaft. Now you're prepared to begin your next small adventure!

Two sets of springs are consisted of in the Huge Bore Scaler Shock set. The shocks come pre-assembled with a standard spring rate best for those stock or close-to-stock rigs. The optional stiffer springs (marked with red paint) are perfect for rigs with heavier bodies or simply to tune to your specific conditions. It consists of all hardware required to install up to either your AX24™ or SCX24™. Don't lose out on the coolest looking and finest carrying out tiny shocks in the world, Get your own Pro-Line Huge Bore Scaler Shocks today!

PRO639100 | Big Bore Scaler Shocks 50mm (4) for SCX24™ and AX24™

Features

Fits

Specs