D951TW FMC High Torque Titanium Gear

Manufacturer Description

This is the Hitec D-Series 32 Bit Metal Case High Torque Titanium Gear Servo.


FEATURES:
For 20-120 class aircraft, all EP 600-700 class helicopters, all
    GP 30-90 class helicopters, 1-10-1/4 scale vehicle steering and
    throttle, and nitro and gasoline powered boats
Durable titanium alloy metal gears with dual ball bearings
Ultra hard gear shaft with three axial metal bushings
32-bit MCU and 12-bit ADC for unprecedented programmability and
    flexibility
*Programmable digital amplifier with MOSFET drive
Water and dust resistant (splash proof)
Full aluminum case


INCLUDES:
D-951TW High Torque Servo
0.98" (25mm) Single Arm
1.7" (44mm) Double Arm
1.5" (38mm) 4-Point Horn
1.4" (36mm) Round Horn
Four each Grommets, Eylets and Mounting Screws
Metal Adapter Ring and extra Servo Horn Screw


SPECS:
Operating Voltage Range: 4.8, 6.0 and 7.4V
4.8V 6.0V 7.4V
Speed: 0.23 0.17 0.14 sec/60°
Torque: 292 403 486 oz-in
21 29 35 kg-cm
Motor Type: Coreless
Current Draw at Idle: 30mA
No Load Operating Current Draw: 500 mA
Stall Current Draw: 6,200mA
Deadband Width: 1 us
Dimensions: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)
Weight: 2.4 oz (68g)
Number of Teeth on Spline: 25
Diameter of Horn Screw: 3mm
Circuit Type: 32bit programmable digital
Connector Gauge (AWG) Strand Count: 20/80


COMMENTS:
*Programmable features require Hitec Servo Programmer sold separately
HFP-30 HRCM4427, and DPC-11 Programming Interface, HRCP4429


A note on Coreless motors: conventional servo motors have a steel
core armature wrapped with wire that spins inside the magnets. In
a Coreless design, the armature uses a thin wire mesh that forms a
cup that spins around the outside of the magnet eliminating the
heavy steel core. This design results in smoother operation and
faster response time.




BOX DIMENSIONS: 3.00" W. X 1.75" H. X 3.88" L.
BOX WEIGHT: .34 LBS.