Will be available soon. February 1st to March 15th
Specification: After times of researches and development, Align R&D team dedicated all of its technical expertise and experiences into the development of a brand new aerial photography platform, to give birth to the brand new. Standard Equipment: G2 Gimbal x 1 Multicopter Canopy x 1 7 Inch Main Rotor x 4 Sets External Status LED x 1 BL4213(370KV) Brushless Motor x 4 Multicopter Brushless ESC x 4 PCU Power Control Unit x 1 APS-M Multicopter Controller x 1 Multicopter GPS Sensor x 1 6S1P 22.2V 6000mAh/30C HBP60001 X 1
Specification: Airframe Diameter: 710mm Height: 266mm Main Blade Length: 179mm Main Rotor Diameter: 391mm Flying Weight(without battery): 2500g
G2 Gimbal Specification: Input Voltage: DC 12V(3S) Current Draw: <500mA Maximum Control Range: PAN 340? ROLL ?20? TILT 120? Maximum Control Rotation Rate: PAN 60?/s ROLL 60?/s TILT 60?/s Temperature Range: -20~80?C Voltage Output:5V / 0.3A Dimension: 100.4x74x111.5mm Weight: Approx. 200g
APS-M Flight Control System Introduction: Brand new APS-M Flight Control System with superior performance through cutting edge information technologies, utilizing high precision sensors and modern system control subroutines. Support quad(4), hex(6), and octo(8) rotors. Flight modes include attitude, GPS velocity, GPS angular, intelligent, and manual. In addition, it features failsafe auto return home, low voltage failsafe (through LED indicator and auto Return Home), OSD signal output, gimbal control, and Point of Interest (POI) function. Compatible with PC and Bluetooth interface, could be easily adjust flight parameter and update firmware at any time.
APS-M Flight Control System Features: Brand new APS-M flight control system with higher performance, precision sensors and superior reliability platform. APS-M supports 4, 6, and 8 rotors multicopters, with flight modes such as Manual, Attitude, GPS (angular), GPS (speed). Equipped with automatic return home function with remote activation ability from R/C transmitter. When RC transmitter signal is lost, multicopter will automatically fly back to home position. APS-M provides 3 intelligent flight modes: CFO, HCL, and POI. Provides real-time OSD flight data output function. RoHS certified. Compatible with PC and Bluetooth interface, could be easily adjust flight parameter and update firmware at any time. Also fully support with Futaba, Spektrum and JR S. BUS/S.BUS and DSM2/DSMX/DSMJ/DMSS system.
APS-M Flight Control System Specification: Input Voltage:DC 4.5~8.4V Operating Current Consumption:<250mA @ 4.8V Operating Frequency:400Hz Operating Temperature:-20℃~65℃ Hovering Precision (Depending on Satellite Status):Horizontal ?1m Vertical ?1m Maximum Flight Speed:Horizontal 15m/sec Vertical 6m/sec Maximum Altitude Restriction:700m(2297ft) above the takeoff point Maximum Angular Speed: Aileron 115?/sec Elevator 115?/sec Rudder 145?/sec Maximum Tilting Angle:30 degrees Supports External Peripherals:"G2/ G3 Gimbal、OSD+FPV Video Transmitter " Supports Multicopter Configurations:"4 rotors +, 4 rotors X, 6 rotors +, 6 rotors X, 8 rotors +, 8 rotors X." Dimension:49x34.3x20mm
PCU Power Control Unit: Input Voltage:13.2V~25.2V(4S~6S Li-Po) Operating Frequency:500KHz Dimension:62x35x26mm
BL4213 Motor 370KV(RPM/V): Input Voltage:DC 22.2V Max Continuous Current:25A Max Continuous Power:550W Stator Arms:12 Magnet Poles:14 Dimension/Weight:φ4xφ52x33mm / 185g
Motor ESC: Input Voltage:13.2V~25.2V(4S~6S Li-Po) Max Continuous Current:40A Dimension:74.2x27x12.7mm