Dubro Nylon Hinges

These are Standard Nylon Hinges

FEATURES:
Nylon building and construction w/steel hinge pin

INCLUDES:
Six hinges

SPECIFICATIONS:
5/8"x1-1/8" total unfolded length

COMMENTS:
Accuracy molded, checked and assembled with secured hinge pin.
Easy to install. Hinges have 6 holes on each side for optimum
holding power.

Below is another thing that praises the thing being discussed.



MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Affordable,
Easy, Clean, when Compared with "old made" Coverings, Quick To Use.

For fantastic covering ideas and to guarantee an expert finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive Activates When Heat is Applied
Shrinks to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Waterproof
More powerful and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Jet White Covering
One Direction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote Might
    Vary Slightly In Color Between Production Runs of These Products.
If Using 3 or More Rolls of the Exact same Color, it is Suggested to
    Use a 25' Roll (TOPQ1204) To Guarantee the Exact same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Need to Be Utilized With LustreKote Paint to Highlight Its
    True Color.
MonoKote Trim Sheet: TOPQ4104

MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
EconoKote IS For Use Directly On Foam, Use the Following:
EconoKote Covering: TOPQ2604-TOPQ2612
    (EconoKote might be used on top of MonoKote, but not under MonoKote.)
Temperature Varies:
    Connecting to Wood: 215 - 240°F (turning on the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F