Pinecar Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your car, the quicker it goes.
Incremental weights allow you to adjust you car's weight, even on
    race day.
Drill 3/8" (9.5mm) diameter hole in the car and install the weight.
Carded packaging with instructions on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

This product compliments the main item below.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
A special mix of micron size graphite particles created to
    minimize the coefficient of friction and give your car the winning
    edge.
High in carbon content, give it remarkable lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on the majority of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

The below product also sets truly well with the product being discussed.



These are Super Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed instructions and valuable hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are valuable for structure and displaying
    your car: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

Right here is another product that compliments the product being discussed.

Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool might be used with any gravity race car whose overall
    optimum measurements are 7" long, 2-3/4" large, and need 3/8"
    clearance from track to floor on car body.
Perform 7 checks:
    Check axle slots for alignment.
    Check clearance between wheel and car body.
    Avoid camber.
    Check toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

Right here is a fantastic product that lots of others have bought at the very same time.

Racing Wheel

This is a Set of 4 Racing Wheels from Pine Car.

FEATURES:
Racing Wheels are the same high quality wheels and axles found in
    Pine Automobile luxurious and basic car kits.
Includes 4 wheels, two axles and five hubcaps.
Black plastic construction.

INCLUDES:
4 Racing Wheels

SPECS:
Size: 1-1/8" (29mm)

Right here is another product that compliments the product being discussed.

Wheel Turning Mandrel

This is a Wheel Turning Mandrel from Pine Car.

FEATURES:
The Wheel Turning Mandrel holds wheels safely in drill while
    removing mold seam for smooth, fast-running wheels.
Includes two-piece mandrel, two grades of sandpaper and complete
    instructions.

INCLUDES:
One Wheel Turning Mandrel

REQUIRES:
Electric Drill

The below product also sets truly well with the product being discussed.

Sandpaper Assortment

This is a Sandpaper Selection from Pine Car.

FEATURES:
Garnet paper is a long-term sandpaper and is the expert
    woodworker's option for sanding.
Use a series of grades; start with the coarsest grade and development
    to finer grades.
Includes coarse (80) for heavy wood removal, medium (120) for
    moderate, and fine (220) to get ready for painting.
Includes two sheets of each grade of sandpaper.

INCLUDES:
One Sandpaper Selection (six sheets).

SPECS:
Length: 4-5/8" (118mm)
Width: 2-1/2" (64mm)