Pinecar Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The much heavier your automobile, the much faster it goes.
Incremental weights permit you to change you automobile's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the automobile and set up the weight.
Carded product packaging with instructions on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

This item compliments the main item right here.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
A special mix of micron size graphite particles created to
    decrease the coefficient of friction and provide your automobile the winning
    edge.
High in carbon material, provide it remarkable lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

The listed below item likewise sets really well with the item being gone over.



These are Incredibly Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed instructions and helpful hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are helpful for structure and displaying
    your automobile: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

Below is one more item that compliments the item being gone over.

Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool might be utilized with any gravity race automobile whose general
    optimum measurements are 7" long, 2-3/4" large, and require 3/8"
    clearance from track to lowest point on automobile body.
Perform seven checks:
    Inspect axle slots for positioning.
    Inspect clearance in between wheel and automobile body.
    Avoid camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

Below is a wonderful item that many others have actually purchased the exact same time.

Racing Wheel

This is a Set of Four Racing Wheels from Pine Car.

FEATURES:
Racing Wheels are the same high quality wheels and axles discovered in
    Pine Vehicle luxurious and standard automobile kits.
Includes 4 wheels, two axles and five hubcaps.
Black plastic construction.

INCLUDES:
Four Racing Wheels

SPECIFICATIONS:
Diameter: 1-1/8" (29mm)

Below is one more item that compliments the item being gone over.

Wheel Turning Mandrel

This is a Wheel Turning Mandrel from Pine Car.

FEATURES:
The Wheel Turning Mandrel holds wheels firmly in drill while
    removing mold joint for smooth, fast-running wheels.
Includes two-piece mandrel, two grades of sandpaper and total
    instructions.

INCLUDES:
One Wheel Turning Mandrel

REQUIRES:
Electric Drill

The listed below item likewise sets really well with the item being gone over.

Sandpaper Assortment

This is a Sandpaper Selection from Pine Car.

FEATURES:
Garnet paper is a long-term sandpaper and is the expert
    woodworker's option for sanding.
Use a sequence of grades; begin with the coarsest grade and progress
    to finer grades.
Includes coarse (80) for heavy wood removal, medium (120) for
    moderate, and fine (220) to get ready for painting.
Includes two sheets of each grade of sandpaper.

INCLUDES:
One Sandpaper Selection (6 sheets).

SPECIFICATIONS:
Length: 4-5/8" (118mm)
Width: 2-1/2" (64mm)