Pinecar Pinecar Wedge

Create Your very own Original Car Design with the Fundamental Wedge from PineCar.

FEATURES:
Carefully selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will develop
    and construct your derby car.
Pre-cut, plain wedge formed block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.

INCLUDES:
One Wedge Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: from 1" to 1/8" (25mm - 30mm)

COMMENTS:
The following products are practical for building and displaying your
    car: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Display Stand

Want an additional excellent product to enhance the above stated product?



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique mix of micron size graphite particles developed to
    decrease the coefficient of friction and offer your car the winning
    edge.
High in carbon content, offer it superior lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

Get this product to boost the one you are reading around.

Pinecar Block

Create Your very own Original Car Design with the Basic Block from PineCar.

FEATURES:
Carefully selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will develop
    and construct your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.

INCLUDES:
One Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: 1-1/4" (32mm)

COMMENTS:
The following products are practical for building and displaying your
    car: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Display Stand

This product praises the above talked about product.

Adjustable Stick-On Weights 2 oz

This is an Adjustable Stick-On Weight Set from Pine Car.

FEATURES:
The heavier your car, the quicker it goes.
    Incremental weights enable you to change your car's weight.
Remove portion of weight needed with a pliers.
Attach to bottom of car using the consisted of double stick tape.
Carded product packaging with directions on the rear.

INCLUDES:
One Adjustable Stick-On Weight Set.

REQUIRES:
Pliers

SPECS:
Length: 3-7/8" (98mm)
Width: 1-1/2" (38mm)
Weight: 1oz (28g) per weight

This is a fantastic addition to the product presently being talked about.

Racing Wheel

This is a Set of 4 Racing Wheels from Pine Car.

FEATURES:
Racing Wheels are the exact same high quality wheels and axles discovered in
    Pine Car luxurious and basic car kits.
Includes 4 wheels, two axles and five hubcaps.
Black plastic construction.

INCLUDES:
4 Racing Wheels

SPECS:
Diameter: 1-1/8" (29mm)