Pinecar Pinecar Wedge

Develop Your Own Original Automobile Design with the Fundamental Wedge from PineCar.

FEATURES:
Thoroughly chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will design
    and construct your derby car.
Pre-cut, plain wedge formed block.
Pre-cut axle grooves.
Cut out your very own design!
Instructions enclosed.

INCLUDES:
One Wedge Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECIFICATIONS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: from 1" to 1/8" (25mm - 30mm)

REMARKS:
The following products are practical for structure and showing your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Reserve
PINY1382--Racer Show Stand

Want one more wonderful product to match the above discussed product?



This is a .25oz Tube of Graphite
from Pine-Pro Competition Components.

FEATURES:
A special mix of micron size graphite particles formulated to
    minimize the coefficient of friction and provide your automobile the winning
    edge.
High in carbon material, provide it remarkable lubricating characteristics.
Will not draw in dust and dirt.
Perfect dry lubricant for application on the majority of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

Get this product to enhance the one you are reading around.

Pinecar Block

Develop Your Own Original Automobile Design with the Basic Block from PineCar.

FEATURES:
Thoroughly chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will design
    and construct your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your very own design!
Instructions enclosed.

INCLUDES:
One Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECIFICATIONS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: 1-1/4" (32mm)

REMARKS:
The following products are practical for structure and showing your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Reserve
PINY1382--Racer Show Stand

This product compliments the above reviewed product.

Adjustable Stick-On Weights 2 oz

This is an Adjustable Stick-On Weight Set from Pine Car.

FEATURES:
The heavier your automobile, the much faster it goes.
    Incremental weights enable you to change your automobile's weight.
Remove portion of weight required with a pliers.
Attach to bottom of automobile utilizing the included double stick tape.
Carded product packaging with instructions on the rear.

INCLUDES:
One Adjustable Stick-On Weight Set.

REQUIRES:
Pliers

SPECIFICATIONS:
Length: 3-7/8" (98mm)
Width: 1-1/2" (38mm)
Weight: 1oz (28g) per weight

This is a fantastic enhancement to the product presently being reviewed.

Racing Wheel

This is a Set of 4 Racing Wheels from Pine Car.

FEATURES:
Racing Wheels are the very same high quality wheels and axles discovered in
    Pine Automobile luxurious and standard automobile kits.
Includes 4 wheels, two axles and five hubcaps.
Black plastic construction.

INCLUDES:
4 Racing Wheels

SPECIFICATIONS:
Diameter: 1-1/8" (29mm)