Pinecar Basic Car Kit

Produce Your Own Original Automobile Design with the Basic Block Kit from PineCar.

FEATURES:
Thoroughly chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will create
    and develop your derby car.
Ideal for those who wish to produce their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Strong Axles, Four Wheels,
5 Wheel Retainers, Four Axles (Nails), and Instructions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Weight(s)
Paint
REMARKS:
The following items are valuable for building and showing your
    vehicle: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Reserve
PINY1382--Racer Show Stand

Get this product to improve the one you are reading around.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique blend of micron size graphite particles formulated to
    lower the coefficient of friction and provide your vehicle the winning
    edge.
High in carbon content, provide it superior lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

Get this product to improve the one you are reading around.



These are Incredibly Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed guidelines and valuable hints.

INCLUDES:
(5) Axles

REMARKS:
The following items are valuable for building and showing
    your vehicle: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

This product is frequently bought with the above discussed product.

Eliminator Custom Parts

This is the "Eliminator" Customized Components Set from Pine Car.

FEATURES:
Customized Components such as drivers, engines and pipelines, rollbars and more
    can quickly transform an easy vehicle job into an exciting work
    of pride!
Extremely versatile and can be utilized on many different designs of cars.
Cast metal parts.
Includes two exhaust pipelines, one engine and one spoiler.

INCLUDES:
One "Eliminator" Customized Components Set

REQUIRES:
Cement

Here is an additional product that compliments the product being talked about.

Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool may be utilized with any gravity race vehicle whose general
    maximum measurements are 7" long, 2-3/4" wide, and need 3/8"
    clearance from track to lowest point on vehicle body.
Perform 7 checks:
    Inspect axle slots for positioning.
    Inspect clearance between wheel and vehicle body.
    Prevent camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This is a superb enhancement to the product presently being talked about.

Strip Weight 2 oz

This is a Set of 2oz Strip Weights from Pine Car.

FEATURES:
The much heavier your vehicle, the much faster it goes.
Incremental weights enable you to change you vehicle's weight, even on
    race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded product packaging with guidelines on rear.

INCLUDES:
One Set of 2oz Strip Weights

REQUIRES:
Pliers

SPECIFICATIONS:
Length: 3-1/2" (98mm)
Width: 5/8" (16mm)
Weight: 2oz (56.7g)