Pinecar Basic Car Kit

Produce Your very own Original Car Design with the Basic Block Package from PineCar.

FEATURES:
Carefully chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will design
    and construct your derby car.
Ideal for those who wish to develop their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, Two Strong Axles, 4 Wheels,
5 Wheel Retainers, 4 Axles (Nails), and Directions

NEEDS:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
REMARKS:
The following products are handy for building and displaying your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Book
PINY1382--Racer Display Stand

Get this thing to boost the one you are reading around.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
A special mix of micron size graphite particles developed to
    decrease the coefficient of friction and provide your automobile the winning
    edge.
High in carbon material, provide it exceptional lubricating characteristics.
Will not bring in dust and dirt.
Perfect dry lube for application on a lot of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

Get this thing to boost the one you are reading around.



These are Super Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed directions and handy hints.

INCLUDES:
(5) Axles

REMARKS:
The following products are handy for building and displaying
    your automobile: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

This thing is often acquired with the above mentioned thing.

Eliminator Custom Parts

This is the "Remover" Custom Components Set from Pine Car.

FEATURES:
Custom Components such as drivers, engines and pipes, rollbars and more
    can easily change a simple automobile project into an exciting work
    of pride!
Extremely versatile and can be used on many different designs of cars.
Cast metal parts.
Includes 2 exhaust pipes, one engine and one spoiler.

INCLUDES:
One "Remover" Custom Components Set

NEEDS:
Cement

Right here is one more thing that compliments the thing being talked about.

Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool may be used with any gravity race automobile whose total
    optimum measurements are 7" long, 2-3/4" wide, and require 3/8"
    clearance from track to floor on automobile body.
Perform 7 checks:
    Inspect axle slots for positioning.
    Inspect clearance between wheel and automobile body.
    Avoid camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This is a wonderful addition to the thing currently being talked about.

Strip Weight 2 oz

This is a Set of 2oz Strip Weights from Pine Car.

FEATURES:
The much heavier your automobile, the faster it goes.
Incremental weights permit you to adjust you automobile's weight, even on
    race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with directions on rear.

INCLUDES:
One Set of 2oz Strip Weights

NEEDS:
Pliers

SPECS:
Length: 3-1/2" (98mm)
Width: 5/8" (16mm)
Weight: 2oz (56.7g)