Pinecar Basic Car Kit

Develop Your Own Original Automobile Design with the Basic Block Set from PineCar.

FEATURES:
Carefully chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will develop
    and construct your derby car.
Ideal for those who want to produce their own distinct design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Strong Axles, 4 Wheels,
5 Wheel Retainers, 4 Axles (Nails), and Instructions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
COMMENTS:
The following products are useful for building and displaying your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Display Stand

Get this item to improve the one you are reading about.



This is a .25oz Tube of Graphite
from Pine-Pro Competition Components.

FEATURES:
An unique mix of micron size graphite particles created to
    reduce the coefficient of friction and provide your automobile the winning
    edge.
High in carbon content, provide it superior lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lube for application on a lot of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

Get this item to improve the one you are reading about.



These are Very Speed Axles from PINE-PRO Competition Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed guidelines and useful hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are useful for building and displaying
    your automobile: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

This item is frequently bought with the above stated item.

Eliminator Custom Parts

This is the "Eliminator" Customized Parts Set from Pine Car.

FEATURES:
Customized Parts such as drivers, engines and pipes, rollbars and more
    can easily transform a simple automobile project into an exciting work
    of pride!
Extremely flexible and can be used on several styles of cars.
Cast metal parts.
Includes 2 exhaust pipes, one engine and one spoiler.

INCLUDES:
One "Eliminator" Customized Parts Set

REQUIRES:
Cement

Right here is another item that praises the item being discussed.

Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool might be used with any gravity race automobile whose general
    maximum measurements are 7" long, 2-3/4" broad, and need 3/8"
    clearance from track to floor on automobile body.
Perform seven checks:
    Inspect axle slots for alignment.
    Inspect clearance between wheel and automobile body.
    Prevent camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This is a superb enhancement to the item presently being discussed.

Strip Weight 2 oz

This is a Set of 2oz Strip Weights from Pine Car.

FEATURES:
The heavier your automobile, the quicker it goes.
Incremental weights enable you to adjust you automobile's weight, even on
    race day.
Break off the quantity of weights you require, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with guidelines on rear.

INCLUDES:
One Set of 2oz Strip Weights

REQUIRES:
Pliers

SPECS:
Length: 3-1/2" (98mm)
Width: 5/8" (16mm)
Weight: 2oz (56.7g)