Pinecar Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool might be utilized with any gravity race car whose general
    optimum measurements are 7" long, 2-3/4" wide, and need 3/8"
    clearance from track to lowest point on car body.
Perform 7 checks:
    Inspect axle slots for alignment.
    Inspect clearance between wheel and car body.
    Prevent camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This product praises the main item right here.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique blend of micron size graphite particles created to
    decrease the coefficient of friction and give your car the winning
    edge.
High in carbon content, give it remarkable lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on most surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

This product is regularly acquired with the above stated product.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The much heavier your car, the quicker it goes.
Incremental weights enable you to change you car's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the car and set up the weight.
Carded product packaging with instructions on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want one more fantastic product to compliment the above stated product?



These are Incredibly Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed instructions and handy hints.

INCLUDES:
(5) Axles

REMARKS:
The following items are handy for building and displaying
    your car: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want one more fantastic product to compliment the above stated product?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack pastime glue that is fast-setting for immediate hold, gap-filling
    to adhere unequal surfaces and impact-resistant due to the fact that it does not
    become brittle.
Dries clear as glass.
Non-toxic, non-flammable and no hazardous odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Formula Glue.

SPECS:
.5oz (15ml)

This product praises the above discussed product.

Basic Car Kit

Develop Your very own Original Vehicle Design with the Basic Block Kit from PineCar.

FEATURES:
Carefully picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will design
    and build your derby car.
Ideal for those who wish to produce their own distinct design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Strong Axles, Four Wheels,
Five Wheel Retainers, Four Axles (Nails), and Guidelines

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
REMARKS:
The following items are handy for building and displaying your
    car: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Show Stand