Pinecar Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool might be utilized with any gravity race vehicle whose overall
    maximum measurements are 7" long, 2-3/4" broad, and need 3/8"
    clearance from track to floor on vehicle body.
Perform seven checks:
    Check axle slots for alignment.
    Check clearance between wheel and vehicle body.
    Avoid camber.
    Check toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This product compliments the main item right here.



This is a .25oz Tube of Graphite
from Pine-Pro Competition Components.

FEATURES:
A special blend of micron size graphite particles created to
    decrease the coefficient of friction and offer your vehicle the winning
    edge.
High in carbon material, offer it superior lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

This product is frequently gotten with the above discussed product.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your vehicle, the faster it goes.
Incremental weights enable you to adjust you vehicle's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the vehicle and set up the weight.
Carded packaging with directions on rear.

INCLUDES:
One Set of 2oz Round Weights

NEEDS:
Pliers

SPECS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want one more wonderful product to match the above discussed product?



These are Very Speed Axles from PINE-PRO Competition Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed directions and useful hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are useful for building and displaying
    your vehicle: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want one more wonderful product to match the above discussed product?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack hobby glue that is fast-setting for immediate hold, gap-filling
    to adhere irregular surfaces and impact-resistant because it does not
    become brittle.
Dries clear as glass.
Non-toxic, non-flammable and no damaging odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Solution Glue.

SPECS:
.5oz (15ml)

This product compliments the above gone over product.

Basic Car Kit

Produce Your very own Original Car Design with the Basic Block Set from PineCar.

FEATURES:
Carefully picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will create
    and construct your derby car.
Ideal for those who wish to create their own unique design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Solid Axles, 4 Wheels,
Five Wheel Retainers, 4 Axles (Nails), and Guidelines

NEEDS:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
COMMENTS:
The following products are useful for building and displaying your
    vehicle: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Show Stand