JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Onyx LiPo 2S 7.4V 250mAh 25C Micro Plug (Onyx ONXP1644 | ONXP1644)

Model: Onyx ONXP1644
Dist. #: ONXP1644   SKU: ONXP1644

Be the first to review this product. (Write Review)

Out of stock

Price:  $6.99 + $2.99 shipping

This item will earn you 7 reward point(s).
7 points = $0.14 off your next order. Learn More

Updated on Aug 24, 2019 08:34:49 AM

LiPo 2S 7.4V 250mAh 25C Micro Plug...
This is the Onyx 2S 7.4V 250mAh 25C LiPo Battery with Micro Connector.

Ultrasonically welded cell tabs and balancing wires
2-year restricted warranty-Onyx brand name batteries are required to be
    free from defects in materials and workmanship for a period of two
    years from the date of purchase. Throughout the first twelve months,
    ONYX will, at our discretion, repair or change without service
    charge any product deemed unusable due to those causes.
    After the first full year of guarantee protection ONYX will provide
    extended guarantee protection for another 12 months covering just
    defects in materials and workmanship. Extended protection is restricted
    and does not cover issues caused by abuse, misuse, and improper
    maintenance, failure to follow directions, regular wear, or utilize
    past the battery's optimum ranked number of cycles.

Onyx 2S 7.4V 250mAh 25C LiPo Battery with Micro Connector and JST-XH
    Balancing Connector

LiPo suitable battery charger
LiPo charging bag
If using among the Duratrax chargers listed in the Accessory
    Completion Guide, the Micro Charge Lead (GPMM3149) is required

Voltage Ranking: 7.4V
Ranked Capacity: 250mAh
Maximum Charge Rate: 1.0A/3C
Discharge Rate: 25C
Burst Rate: 50C, 12.5A
Dimensions: 1.4 x 0.83 x 0.55" (35 x 21 x 14mm)
Weight: 0.52oz (15g)
Discharge Lead Wire Size: 20AWG
Discharge Lead Length: 3" (76mm) not consisting of adapter
Discharge Connector: Micro
Stabilizing Connector: JST-XH
Watt Hours: 1.9

ALWAYS utilize a LiPo-approved Charger and Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or leak cells
NEVER put on flammable materials or leave ignored during
ALWAYS Charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm
Visual Parts Finder
What's New?