MyTrickRC 120Mm Single Trickflex White

MyTrickRC's line of TrickFlex LEDs is the next advancement in LED lighting for Hobby and RC lovers - another RC market first for MyTrickRC. Imagine a string or thin wire that lights up like an LED. This is the specific idea with MyTrickRC's line of TrickFlex LEDs. Electrically, the TrickFlex LEDs respond much like any 3mm or 5mm LED - significance, they're dimmable and can be powered from Low Power Ports on ANY MyTrickRC Lighting Controller that we have actually ever developed! Simply plug the TrickFlex LED in any White (Low Power) Port and it will blink, dim, or flash exactly like our 3mm or 5mm LEDs. TrickFlex LEDs can be utilized as brake lights, blinkers, or any other method that you would use a 3mm or 5mm LED. Oh, did we point out, TrickFlex LEDs are waterproof!

Want optimum brightness?

Want to get MyTrickRC's Legendary Insane Brightness from your TrickFlex LED? MyTrickRC uses two alternatives to get Crazy Brightness from TrickFlex LEDs:

1. Merely power through a TrickFlex 5V to 3V Regulator connected to any High Power Port on their HB-2 or DG-1 Dragon Controllers. The TrickFlex 5V to 3V Regulator guarantees you get the correct power to your TrickFlex LEDs. It's that easy... and safe. You can power approximately six TrickFlex LEDs from one TrickFlex 5V to 3V Regulator.

2. Power through a TrickFlex 12V to 3V Regulator connected to your Receiver. With MyTrickRC's TrickFlex 12V to 3V Regulator you do not even need among their Controllers - you can simply power directly from your Receiver. The TrickFlex 12V to 3V Regulator can deal with an input voltage approximately 12V. This actually means that you can power the TrickFlex 12V to 3V Regulator from any source of power approximately 12V, such as a 9V Battery or perhaps a DC power supply.

Have a 3D printer? You can easily develop and print custom parts to use with TrickFlex LEDs. Construct a Store Light, Neon Sign, or other modern accent light. Let your creativity run free!

Like all LEDs from MyTrickRC, the TrickFlex LEDs are thoroughly chosen for Optimum brightness, performance, and sturdiness. They are used as pairs of single LEDs in 6 different colors (White, Red, Blue, Green, Pink, Yellow) and in 2 different lengths (70mm LED and 120mm LED).

REQUIREMENTS:

3V Max, 200mA

WHAT'S INCLUDED:

2pc Single TrickFlex LED in the Length and Color of your choice

1pc Heat Shrink Tube

NOTES:

1. Do NOT pull or stretch the LEDs. Pulling the LED string can trigger one or more LED pixels to stop working. Be careful to minimize twisting the LEDs during assembly.

2. TrickFlex LEDs have a "front" side and a "back" side, and are brightest on their front side. TrickFlex LEDs are more bendable front-to-back than they are side-to-side so know this when installing onto your automobile.

3. Secure the LEDs to your automobile so that after setup they don't get pulled or twisted during active automobile use. Vibration won't hurt TrickFlex LEDs, but pulling and twisting can.

4. Can you blend two different color TrickFlex LEDs on one LED Splitter? Yes! It is okay to connect different color TrickFlex LEDs to a 2-way, 3-way or 4-way LED Splitter.

Item Produced: 08/04/2023