JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Attention! - Vortex Hobbies is not taking any orders until April 1, 2018 while we move our store and warehouse.

Model: Multiplex USA M214275
Dist. #: MPUA4275   SKU: MPUM214275

Be the first to review this product. (Write Review)

Out of stock

List Price:  $139.95
Price:  $89.99 & FREE SHIPPING
You Save:  $49.96 (36%)
Updated on Mar 24, 2018 12:46:49 AM

This is the radio controlled, electric powered,
Multiplex ParkMaster Pro Park Flyer Airplane Kit.
For Intermediate Modelers.
Fully 3D capable, can be flown outdoors in moderate wind.

Construction: Elapor foam white in color
Wings: One-piece all foam
Radio Compartment: Accessible under wing
Aileron Control: Dual servo
Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter,
Wheels: Two foam 2" (51mm)
Canopy: Elapor foam
Decals: Precut peel and stick application with green, red and black
Building Time: Ready to fly in several hours

Pre-molded wings, fuselage and tail assemblies, pushrods, all
    hardware, pre-bent 0.008" (2mm) wire landing gear, two 2" (51mm)
    main wheels, plastic motor mount, decal sheet and photo-illustrated

Motor: 1220Kv brushless outrunner, Multiplex makes a Power Set
    #332652 (not carried) for the ParkMaster Pro that includes a
    Himax C 2816-1220 brushless motor, 30A ESC, and 10x4.7E Propeller
Battery: 3S 11.1V 950mAh LiPo
Battery Charger: LiPo compatible
Radio: 4 channel
Servos: Four micro, 2-Aileron, 1-Elevator, 1-Rudder
Misc. Items: Building and field equipment

Wingspan: 38.4" (975mm)
Wing Area: 450 sq in (29 sq dm)
Weight: 18.4oz (522g)
Wing Loading: 5.9 oz/sq ft) (18 g/sq dm)
Length: 40.5" (1029mm)
Airfoil: Fully symmetrical, mid-wing placement
Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's
    leading edge at the fuselage
Control Throws-
    Ailerons: 2.5" (65mm)
    Elevator: 2.5" (65mm)
    Rudder: 3.5" (90mm)

This model is NOT made of styrofoam and it is not possible to glue
    the material using white or epoxy glue. Medium CA glue used with
    an activator is the only method of gluing recommended by the

BOX DIMENSIONS: 10.00" W. X 7.00" H. X 37.00" L.
Visual Parts Finder