JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Multiplex USA FunJET Ultra ARF

Model: Multiplex USA M214245
Dist. #: MPUA2145   SKU: MPUM214245

Be the first to review this product. (Write Review)

Out of stock

List Price:  $149.95
Price:  $109.99 & FREE SHIPPING
You Save:  $39.96 (27%)
Updated on Aug 22, 2017 09:00:33 AM

FunJET Ultra ARF...
This is the electrical powered, radio managed
FunJet Ultra Package from Multiplex.
For Intermediate to Advanced Modelers.

Building and construction: Elapor foam, white in color
Wings: One-piece with 22.5" (571mm) x .25" (6.35mm) fiberglass spar
Canopy: Removable for access to electronic devices
Landing Gear: None, design needs to be hand introduced and stubborn belly landed
Control Surfaces: Aileron and elevator (delta mixer needed)
Hardware: Pushrods, hook and loop material, screw lock ports,
    and other miscellaneous hardware inlcuded
Motor Mount: Black plastic building and construction

FunJet Ultra Package with Decals, Wing Spar, Motor Mount and Instruction

Radio: A minimum of 3-channel with elevon mixing
Servos: 2 micro size
12" (305mm) Servo Extensions: Two
Motor: Outrunner brushless, Multiplex makes a Power Load that
    consists of a brushless motor, ESC, propeller and motor mount
LiPo Battery: THREE 2100-3200mah pack may require a
mating connector (WSDM1302) to be soldered to the ESC battery leads
LiPo Battery Charger: Suitable with picked battery
Structure and field equipment

Wingspan: 30.8" (783mm)
Wing Location: 224.75 sq in (14.52 sq dm)
Wing Loading: 19.7oz sq/ft (60.12g sq/dm)
Fuselage Length: 29.5" (750mm)
Setup: Mid-wing
Airfoil: Semi-symmetrical
Weight: 31oz (875g)
Control Throws-
    Elevator, Up: 10mm
Down: 8mm
    Aileron: +8 / -11mm (unfavorable differential)
Center of mass (CG): No mathematical value given by manufacturer-
    Locate hemispherical markings on underside of wing near leading
    edge. Assistance design at this point with 2 fingertips and change
    position of flight battery to balance. Mark place of battery
    inside fuselage to ensure that it is constantly replaced in the same

This design is NOT made from styrofoam and it is not possible to glue
    the material using white or epoxy glue. Medium CA glue used with
    an activator is the only approach of gluing advised by the


Customers who bought this product also purchased

Multiplex USA DogFighter Kit
$99.99 $165.95


Visual Parts Finder
What's New?
Woodland Scenice J. Franks's Grocery O
$113.89 $149.99