MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/Nissan S15 Body (Silv

MST RMX 2.5 1/10 2WD Brushless RTR Wander Automobile

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Automobile. Structure off of the success of the RMX 2.0 this upgraded version brings the next level of efficiency to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the supreme drift experience. Developed to be easy to drive for novices but still rewarding for the skilled drifter, MST has actually consisted of an updated chassis. This improved chassis deals increased traction and control together with a myriad of adjustments to tweak your driving experience. Whether you are an experienced drifter or simply getting started, the RMX 2.5 RTR offers you the efficiency you are searching for with seeks to match! This RMX 2.5 RTR consists of the Nissan S15 pre-painted body.

NOTE:

With MST's dedication to quality they evaluate drive each vehicle to make sure appropriate operation. Sometimes there may be slight marks on the tires and this is considered normal.

Wheels shown in images may not portray the wheels consisted of with the vehicle. MST consists of a random set of wheels.

Features:

Updated chassis includes enhanced rear traction and control

Two servo install alternatives – vertical or lateral

Updated spur gear allows the gearbox to be converted from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann changes

6 degree KPI steering upright, and -0.5 hauling distance axle style

Revamped inside rod fulcrum install at the front arm features a 10-step height modification and two side positions

Updated HT "Short" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step modification on both sides and the outer fulcrum is 4-step adjustable on both sides

Two motor mounting alternatives – High or Low center of mass

Oil filled high efficiency shocks

Full ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery install accommodates both basic and "shorty" style battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Realistic drift wheel and tire plan

Requirements:

Size: 1/10 Drift Automobile

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive Mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper Hydraulic damper set

Includes:

RMX 2.5 RTR Wander Automobile

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Steering Gyro

Realistic Street Tires

Required To Total:

(1) Two LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector

(1) Compatible Battery Charger

(4) "AA" Batteries (for transmitter)