MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/Nissan R32 GT-R Body

MST RMX 2.5 1/10 2WD Brushless RTR Drift Car

This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this upgraded variation brings the next level of performance to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the supreme drift experience. Created to be easy to drive for novices however still rewarding for the experienced drifter, MST has actually included an updated chassis. This improved chassis offers increased traction and control along with a wide variety of changes to fine tune your driving experience. Whether you are a knowledgeable drifter or simply starting, the RMX 2.5 RTR provides you the performance you are looking for with looks to match! This RMX 2.5 RTR consists of the Nissan R32 GT-R pre-painted body.

NOTE:

With MST's commitment to quality they test drive each car to ensure proper operation. In some cases there may be minor marks on the tires and this is considered normal.

Wheels shown in pictures may not depict the wheels included with the car. MST consists of a random set of wheels.

Features:

Upgraded chassis includes enhanced rear traction and control

2 servo install choices – vertical or lateral

Upgraded spur gear permits the gearbox to be transformed from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI guiding upright, and -0.5 towing distance axle design

Upgraded inside rod fulcrum install at the front upper arm includes a 10-step height change and two side positions

Upgraded HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod includes a 5-step change on both sides and the external fulcrum is 4-step adjustable on both sides

2 motor mounting choices – High or Low center of mass

Oil filled high performance shocks

Complete ball bearings throughout

Steel CVD axle transmission system

Sensible caliper and disc shape brake set

Battery install accommodates both standard and "shorty" design battery packs

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed guiding servo 

MGX Steering Gyro

Sensible drift wheel and tire bundle

Specifications:

Size: 1/10 Drift Car

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive Mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper Hydraulic damper set

Includes:

RMX 2.5 RTR Drift Car

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Steering Gyro

Realistic Street Tires

Needed To Complete:

(1) 2S LiPo or 6-Cell NiMH Battery Load w/T-Style Connector

(1) Compatible Battery Battery Charger

(4) "AA" Batteries (for transmitter)