MST RMX 2.0 1/10 2WD Brushless RTR Drift Car w/LP56 Body (Grey)

Rear Wheel Drive, High-Performance RTR Wander Set - with LP56 Body!

The MST RMX 2.0 RTR develops on the success of the RMX 2.0 S Set, using the exact same meticulous style features that provide a brand-new sense of speed and easily controlled angles. If you have been awaiting the best car to enter the drift scene, the RMX 2.0 RTR is the kit you have been awaiting. This particular RTR comes with the LP56 drift body for severe style and performance.

NOTE:



MST test drives their cars so it is normal for there to be slight marks on the tires.

Wheels displayed in images might not be the wheels you get. The producer consists of random wheels. 

Functions:

Two motor install alternatives – upper or lower gravity

Two servo install alternatives – vertical or lateral

Plastic high rigidness building

Distinct front suspension system for terrific steering

The adjustable steering system with two-step Ackermann modifications

6 degrees KPI steering upright, and -0.5 towing range axle style

Inside rod fulcrum mount at the front upper arm features 10-step height adjustment and both side positions

Fully-sealed dustproof bevel gear transmission system

Requirement ball differential

5 adjustable second-deceleration-ratio gear sets of 1.89-3.82 (standard 3.08)

The fulcrum at the rear suspension upper rod is 5-step adjustable on both sides. The outer fulcrum is 4-step adjustable on both sides

Steel CVD axle of rear transmission system

Suitable for long and short battery

Complete terrific smooth metal ball ports

Requirement realistic caliper and disc shape brake set

Specs:

Size: 1/10 Drift Cars and truck

Wheelbase: 257mm

Width: 190mm

Drive mode: RWD

Caster: adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.0 RTR Drifter

XTR-02 2.4GHz Radio System

XBL 2500kV Brushless Motor

XBL50 Brushless ESC

AX-251 Servo

Gyro

Realistic Street Tires

Needed To Complete:

(1) Two LiPo or 6-Cell NiMH Battery Load w/T-Style Connector

(1) Suitable Battery Battery Charger

(4) "AA" Batteries (for transmitter)

This item was contributed to our brochure on November 1, 2021