MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/LBMT Body (Red)

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Vehicle. Building off of the success of the RMX 2.0 this upgraded variation brings the next level of performance to the RMX name. With numerous hours of research and advancement, MST has fine tuned the RMX platform for the supreme drift experience. Developed to be easy to drive for novices but still rewarding for the knowledgeable drifter, MST has actually included an updated chassis. This enhanced chassis deals increased traction and control along with a huge selection of modifications to tweak your driving experience. Whether you are an experienced drifter or simply getting going, the RMX 2.5 RTR offers you the performance you are trying to find with wants to match! This RMX 2.5 RTR includes the LBMT pre-painted body.


NOTE:

With MST's commitment to quality they check drive each automobile to guarantee appropriate operation. Sometimes there might be minor marks on the tires and this is considered normal.

Wheels displayed in photos might not portray the wheels included with the automobile. MST includes a random set of wheels.

Features:

Updated chassis adds enhanced rear traction and control

2 servo install choices – vertical or lateral

Updated spur gear enables the transmission to be transformed from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI guiding upright, and -0.5 towing range axle design

Upgraded inside rod fulcrum install at the front arm includes a 10-step height adjustment and two side positions

Updated HT "Brief" back lower arm

The fulcrum at the rear suspension upper rod includes a 5-step adjustment on both sides and the external fulcrum is 4-step adjustable on both sides

2 motor mounting choices – High or Low center of gravity

Oil filled high performance shocks

Full ball bearings throughout

Steel CVD axle transmission system

Sensible caliper and disc shape brake set

Battery install accommodates both basic and "shorty" style battery packs

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed guiding servo 

MGX Steering Gyro

Sensible drift wheel and tire bundle

Requirements:

Size: 1/10 Drift Automobile

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper: Hydraulic damper set

Includes:

RMX 2.5 RTR Wander Vehicle

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Needed To Complete:

(1) TWO LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector

(1) Compatible Battery Charger

(4) "AA" Batteries (for transmitter)