MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/E30RB Body (Grey)

This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Cars And Truck. Building off of the success of the RMX 2.0 this upgraded variation brings the next level of performance to the RMX name. With numerous hours of research and advancement, MST has tweaked the RMX platform for the ultimate drift experience. Created to be easy to drive for newbies however still rewarding for the skilled drifter, MST has consisted of an upgraded chassis. This enhanced chassis deals increased traction and control together with a wide variety of modifications to tweak your driving experience. Whether you are an experienced drifter or simply starting, the RMX 2.5 RTR offers you the performance you are looking for with seeks to match! This RMX 2.5 RTR includes the E30RB pre-painted body.


NOTE:

With MST's commitment to quality they check drive each vehicle to make sure appropriate operation. In many cases there may be slight marks on the tires and this is considered normal.

Wheels shown in images may not illustrate the wheels consisted of with the vehicle. MST includes a random set of wheels.

Features:

Updated chassis includes better rear traction and control

Two servo set up choices – vertical or lateral

Updated spur equipment allows the transmission to be converted from RMX to RRX setups

Adjustable high angle steering system with adjustable Ackermann changes

6 degree KPI steering upright, and -0.5 pulling distance axle style

Upgraded inside rod fulcrum mount at the front upper arm features a 10-step height adjustment and two side positions

Updated HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step adjustment on both sides and the outer fulcrum is 4-step adjustable on both sides

Two motor mounting choices – High or Low center of mass

Oil filled high performance shocks

Complete ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery mount accommodates both standard and "shorty" design battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Realistic drift wheel and tire package

Specifications:

Size: 1/10 Drift Cars and truck

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.5 RTR Drift Cars And Truck

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Needed To Complete:

(1) TWO LiPo or 6-Cell NiMH Battery Load w/T-Style Port

(1) Suitable Battery Battery Charger

(4) "AA" Batteries (for transmitter)