More's Ideal Products Shss M4 X .099 Pin Screw (4)

These are the HW/SHSS M4x0.99 Pin Screws used in the
MIP Super Ball Diff Kit for the 2WD Traxxas Slash.

FEATURES:
Steel building and construction

CONSISTS OF:
4 HW/SHSS M4x0.99 Pin Screws

You will enjoy this item if you have the item earlier stated.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Assistance
Guideline Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

The below product also pairs truly well with the product being discussed.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

You will enjoy this item if you have the item earlier stated.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

The below product also pairs truly well with the product being discussed.

Replacement Bearing Kit For Rpm T/E-Maxx 2.5R/3.3, E-Maxx 16.8 A

This is the replacement Bearing Set for the RPM Revo Axle
Carrier Set - RPMC8581, RPMC8582 and RPMC8585.

FEATURES:
Stainless-steel building and construction
Shielded to help keep the bearing clean and smooth running

CONSISTS OF:
Two 12x21x5mm bearings
Two 6x15x5mm bearings

NEEDS:
Installation

Here is a terrific product that numerous others have actually purchased the exact same time.



This is a CVD Coupling Rebuild Kit used for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive surface on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

Want one more terrific product to match the above mentioned product?

Shss, M3 X .099 Pin Screw (2)

These are the MIP M3 x .099 Pin Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Two MIP M3 x .099 Pin Screws

This product is often gotten with the above mentioned product.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

NEEDS:
Assembly to vehicle