Kyosho Mini-Z Awd Nissan Fairlady 240Zg White

Kyosho Mini-Z ReadySet with Nissan Fairlady 240ZG Body

The Kyosho MA-020 Mini-Z AWD ReadySet chassis includes VCS (variable camber suspension) on the front that enhances camber modification with suspension stroke and a specifically created circuit board. Totally kitted out with accuracy ball bearings, the high drive performance of the MA-020 chassis is matched in the Readyset by the distinct scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a fantastic value rate. Just install the batteries to delight in the thrill of drift driving with the consisted of set of drift tires. The chassis works with nearly all ASC MINI-Z bodies (additional parts might be needed for some body designs). The MINI-Z AWD guarantees a unique world of significant racing action for you to experience and enjoy.

Note: Optional ICS can NOT be utilized. Also, this model is specially created for the KT-531P transmitter. It is not suitable with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is just suitable with the unique (No.MZW431) gyro system (offered separately).

Features:MINI-Z AWD Readyset based upon MA-020 chassis.
Special circuit board upgraded with optimized steering control program.
Drift tires are set up as standard.
Readyset requires just batteries to be prepared for action!
Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
Factory finished body features screen model quality finish.
Features VCS (variable camber suspension) that changes camber in accordance with suspension stroke.
Coil spring on the front suspension can be quickly replaced without tools.
Wide series of optional parts is available to be installed.

Specifications:Length: 175mm
Height: 52mm
Wheelbase: 90mm (L)
RC System: KT-531P FHSS
Motor: 130 Class
Front Wheel Offset: Narrow 0mm
Rear Wheel Offset: Narrow 0mm
Weight: 180g

Consists of:Factory put together chassis with pre-installed R/C system
Pre-Painted factory put together plastic body, ended up with markings
2.4GHz Syncro KT-531P transmitter
Drift tires (set up)
Pinion equipments (15T, 17T, 19T, 21T)
Stimulate equipments for wheelbases: 27T, 29T, 31T for M, L
Pinion equipment tool
Extra wheel nuts and wheel wrench
Marker Cones

Required to Complete:(4) AAA-size alkaline batteries or Ni-MH batteries for chassis.
(4) AAA-size alkaline batteries for transmitter