Junfac Hardened Universal Shaft For Axial Ax10 Scorpion

Junfac Hardened Universal Shaft For Axial AX10 Scorpion

This is a great enhancement to the thing currently being talked about.

Hex Socket Tap Flat Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
Ten M3 x 10mm screws

NEEDS:
Installation on automobile

COMMENTS:
Can be utilized where ever this size screw is needed

Want one more terrific thing to match the above pointed out thing?



The SW0231MG is a spending plan friendly water resistant digital servo with terrific torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with incredibly high 12-bit (4096) resolution and metal gears for your higher accuracy when dodging puddles. This is a fantastic upgrade if your planning to drive your RC automobile in any condition...rain, sleet, or snow.

Functions:

• Integrates cutting edge
  innovation with incredibly high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Extremely strong metal gears guarantee long-life and durability.
• Our servos are completely green ? from products to production, these servos are ecologically friendly.
• Ideal for RC automobiles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

The below thing also pairs really well with the thing being talked about.



Lots of others have bought this thing along with the thing that you are currently checking out.

Superlift Superide 100mm Scale Shock Absorbers

This is a pair of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building and construction with white painted finish
Internal spring design

CONSISTS OF:
Two Superlift Off-Road 100mm Racing Shocks

NEEDS:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
General Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Specifications (Length): 1.26" (32mm)
Stickers Specifications (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

COMMENTS:
Superlift is a signed up trademark of the Superlift Suspension
    Systems. The Superlift logo is property of Superlift Suspension
    Systems.

Below is one more thing that praises the thing being talked about.

Hardened Steel Gear Set For Axial Ax10

This is the Hot-Racing Hardened Steel Gear Set
    for the Axial Wraith, AX10, and SCX10 Transmissions.

FEATURES:
CNC machined #45 solidified carbon steel building and construction case solidified
    for longer life
Suitable with all Axial three-gear transmissions
Changes Axial factory plastic gears AX80010, and powder metal gear
    AX30394
Great for big brushless power upgrades
Thirty day restricted guarantee beginning at date of purchase- valid
    in the United States only

CONSISTS OF:
52T, 28T, 20T Gears

Below is one more thing that praises the thing being talked about.

Universal Set AX10 (2)

    This is the Universal Set for the Axial AX10 Scorpion.

FEATURES:
Steel building and construction, polished natural finish

CONSISTS OF:
Two Dogbones, 2 Axles, 2 2x10mm Axle Pins, 2 3.2 x7mm Pins and
    2 12.8mm size spacers

NEEDS:
Installation in between diff and wheel hubs

SPECS:
Length: 2.91" (74mm)
Diameter: .14 (3.5mm)