JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.


Integy Steering Knuckle 1/10 Bullet MT/ST

Model: Integy T8698BLUE
Dist. #: INTC4193   SKU: INTT8698BLUE

Be the first to review this product. (Write Review)

Out of stock

Price:  $19.79 + $2.99 shipping
Updated on Aug 22, 2017 10:37:57 AM

Steering Knuckle 1/10 Bullet MT/ST...
These are the optional Integy Steering Knuckles for the
1/10 scale HPI Bullet MT and Bullet ST.

FEATURES:
Billet machined aluminum construction, blue in color

INCLUDES:
2 Steering Knuckles

REQUIRES:
Four 5x10mm ball bearings, order two DTXC1535

This thing praises the above reviewed thing.

LiPo 2S 7.4V 5000mah 40C Hard Univ Plug

This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal Four Plug System allows connectivity between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    merely attach desired plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Vehicle balancer (TCPP9150)

SPECS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

COMMENTS:
CHECK OUT the ENTIRE direction sheet consisted of with battery prior to use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any way or puncture cells
NEVER place on flammable materials or leave ignored during
charging
ALWAYS charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

You will love this item if you have the item above mentioned.

Slipper Clutch Spring 7x9x1.7mm 3 Coils

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel construction

INCLUDES:
One spring

COMMENTS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Get this thing to improve the one you are reading around.

Spring 13.5x63x1.2mm 11Coils

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel construction

INCLUDES:
2 Shock Springs

COMMENTS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

This thing praises the main item here.

Diff Gear Set

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FUNCTIONS:
Steel construction
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Also fits all three transmissions of the D413 Buggy Kit from Hot Bodies

INCLUDES:
2 large bevel gears
Four small bevel gears

COMMENTS:
This differential equipment set can be installed on
1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

Customers who bought this product also purchased

HPI Turnbuckle M3.5x25mm (2)
$3.09 $3.99
$2.99 SHIPPING


HPI101237



HPI Spring 13.5x63x1.2mm 11Coils
$3.69 $4.99
$2.99 SHIPPING


HPI101244



HPI Slipper Clutch Hub Front
$6.89 $7.00
$2.99 SHIPPING


HPI101241



HPI Spring Washer 3x6mm (20)
$2.99 $3.99
$2.99 SHIPPING


HPIZ800



HPI Ball Bearing 10x15x4mm ZZ E-Savage
$14.79 $19.99
$2.99 SHIPPING


HPIB030



HPI Suspension Arm Set
$12.19 $16.99
$2.99 SHIPPING


HPI101213



Visual Parts Finder
What's New?
CEN Racing Heavy Duty Cvs & Outdrive
$24.99 $30.00
$2.99 SHIPPING


CEGGSS10