Injora Rock Tarantula Nylon Buggy Body Chassis Kit for 1/18 TRX4M

INJORA Nylon Rock Buggy Body Shell Chassis Package for 1/18 RC Spider TRX4M Upgrade
Note:
Don't extend the front upper links!!!
Some aftermarket servos will hit the hood and trigger limited front suspension travel. You can use some spacers to raise the hood for more room. We are developing the V2 hoods now.

Assembly Tips:
If you find the holes challenging to line up, you can start by fixing the skid plate to the body with 4 screws, then loosen 1 screw and put the link in.
There is no area in the body for the stock battery strap. You can use a little piece of velcro.

Compatible with: 1/18 TRX4M Defender, Bronco
Functions:
Unassembled package
Nylon Injection Molding
Tube roll cage, really light and firm
Equipped with roofing LED light and Y wire
No rails required

Requirements:
??? INJORA Rock Tarantula ???
Product: Nylon
Color: Clear, Black, Blue, Green, Red, Orange
Use Voltage of Lights: 5-7V
Weight: 48g (1.69oz)
Size: 201*81*62mm (7.91*3.19*2.44in)

Plan List:
1 * Buggy Body Shell

Needed tools:

1* 0.05" hex screwdriver (1.27mm or 1.3mm is also fine)
1* 1.5mm hex screwdriver