Hyperion 300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE (JR)

Several others have gotten this product together with the product that you are presently reading about.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with accessories)

The below product additionally sets truly well with the product being reviewed.

450mm Standard Extension Cable (JR)

HYPERION 450MM STANDARD EXTENSION CABLE (JR)

Below is a wonderful product that several others have bought at the very same time.

Box, Reciever (Sealed)/ Foam Pads/ 2.5X12mm Cs (2)/ 3X6mm Cs (2)

This is the Receiver Box for the 1/10 scale Traxxas Rally Race Car.

FEATURES:
Plastic building, black in color

CONSISTS OF:
Upper and lower Case Halves with Wire Cover
Gasket
2 Foam Pads
2 3x12mm Button Head Cap Screws
2 3x6mm Button Head Cap Screws
2 2.5x12mm Cap Screws
Instruction Sheet

SPECIFICATIONS:
Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm)

You will certainly enjoy this item if you have the item earlier discussed.

E-Z Connector For Rod Or Cable

This is an EZ Port set by Dubro.
EZ Connectors connect a pushrod to a servo arm permitting it to pivot for
less going in control surfaces.

FEATURES:
Works on 2-56 and smaller wire (.078")
Long-term or snap on installing push nuts both included.

INCLUDES:
2 brass EZ Connectors
2 plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECIFICATIONS:
Length of brass connector: 10mm (.395")
Diameter of brass connector: 5.5mm (.217")