Hyperion 300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE TELEVISION (JR)

Many others have gotten this thing in addition to the thing that you are presently checking out.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

The below thing additionally sets truly well with the thing being reviewed.

450mm Standard Extension Cable (JR)

HYPERION 450MM STANDARD EXTENSION CABLE TELEVISION (JR)

Right here is a great thing that lots of others have bought at the same time.

Box, Reciever (Sealed)/ Foam Pads/ 2.5X12mm Cs (2)/ 3X6mm Cs (2)

This is the Receiver Box for the 1/10 scale Traxxas Rally Race Car.

FEATURES:
Plastic building, black in color

INCLUDES:
Upper and lower Case Halves with Wire Cover
Gasket
2 Foam Pads
2 3x12mm Button Head Cap Screws
2 3x6mm Button Head Cap Screws
2 2.5x12mm Cap Screws
Direction Sheet

SPECS:
Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm)

You will certainly love this thing if you have the thing previously mentioned.

E-Z Connector For Rod Or Cable

This is an EZ Adapter set by Dubro.
EZ Connectors connect a pushrod to a servo arm permitting it to pivot for
less bind in control surfaces.

FEATURES:
Functions on 2-56 and smaller sized wire (.078")
Long-term or snap on mounting push nuts both included.

INCLUDES:
2 brass EZ Connectors
2 plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECS:
Length of brass adapter: 10mm (.395")
Diameter of brass adapter: 5.5mm (.217")