HPI Vorza Flux 2.4 RTR

4This is the 2.4GHz radio controlled, brushless electric powered, prepared to run
1/8 scale HPI Vorza Flux HP Buggy.

FEATURES:
Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
Drive: 4 wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
    cooling fins, 5mm shaft
Pinion Gear: 15T steel
Spur Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12" (3mm) thick with 0.31" (8mm) thick
    billet machined aluminum clamps
Radio: 2.4GHz
ESC: HPI Flux Blur Brushless ESC, 6S LiPo suitable with Deans
    battery adapters, 6mm bullet motor adapters and cooling fan
    PC programmable, USB Programming Package needed, order HPIC0573
Shocks: Oil-filled 16mm Big Bore aluminum bodied
Shock Towers: Aluminum, 0.16" (4mm) thick
Differentials: Three with spiral cut gears, oil filled
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Body: Cut and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo prepared with safe and secure hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
    rear sway bars
Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) external size
Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) size
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the vehicle in relation to the
    chassis
Camber: Adjustable front and rear, camber describes the angle of the
    tops of the tires from vertical when seen from front or behind
    car
Service warranty: Two-year minimal service warranty through HPI starting at date of
    purchase. Service warranty valid only in the USA, Canada and South America
    Service warranty not valid in the European Union
Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

CONSISTS OF:
RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
    2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and User's manual

NEEDS:
AA Batteries: 4 for transmitter
Batteries: Two 6-7 cell NiMH flat (not stick packs) at least 4000mAh
    soldered packs only, no welded tabs OR
    two 2S or 3S LiPo with at least 25C rating
Battery Charger: To match chosen batteries
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if chosen
    batteries do not have them
Track devices

SPECS:
Vehicle-
Length: 20" (508mm)
Width: 12" (205mm)
Height: 7" (178mm)
Wheelbase: 12-13/16" (325mm)
    Body-
Length: 13.1" (334mm)
Width: 7.71"(196mm)
Height: 3.8" (98mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Back Differential 1 DTXC1585
4 8x14mm Front Centers 2 DTXC1583
4 8x16mm Back Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Back Diff Case 1 DTXC1585