HPI Vorza Flux 2.4 RTR

4This is the 2.4GHz radio managed, brushless electric powered, ready to run
1/8 scale HPI Vorza Flux HP Buggy.

FEATURES:
Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
Drive: Four wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
    cooling fins, 5mm shaft
Pinion Gear: 15T steel
Spur Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12" (3mm) close 0.31" (8mm) thick
    billet machined aluminum clamps
Radio: 2.4GHz
ESC: HPI Flux Blur Brushless ESC, 6S LiPo suitable with Deans
    battery connectors, 6mm bullet motor connectors and cooling fan
    PC programmable, USB Programming Kit required, order HPIC0573
Shocks: Oil-filled 16mm Huge Bore aluminum bodied
Shock Towers: Aluminum, 0.16" (4mm) thick
Differentials: Three with spiral cut gears, oil filled
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Body: Trimmed and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo ready with safe hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
    rear sway bars
Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) outer diameter
Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) diameter
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable front and back, camber describes the angle of the
    tops of the tires from vertical when viewed from front or behind
    vehicle
Service warranty: Two-year limited service warranty through HPI beginning at date of
    purchase. Service warranty valid only in the USA, Canada and South America
    Service warranty not valid in the European Union
Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

INCLUDES:
RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
    2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

REQUIRES:
AA Batteries: Four for transmitter
Batteries: 2 6-7 cell NiMH flat (not stick packs) a minimum of 4000mAh
    soldered packs only, no bonded tabs OR
    two 2S or 3S LiPo with a minimum of 25C score
Battery Charger: To match picked batteries
Connectors: 2 Deans Female Ultra Plugs (WSDM1303) if picked
    batteries do not have them
Track devices

SPECS:
Automobile-
Length: 20" (508mm)
Width: 12" (205mm)
Height: 7" (178mm)
Wheelbase: 12-13/16" (325mm)
    Body-
Length: 13.1" (334mm)
Width: 7.71"(196mm)
Height: 3.8" (98mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Back Differential 1 DTXC1585
4 8x14mm Front Centers 2 DTXC1583
4 8x16mm Back Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Back Diff Case 1 DTXC1585